Juda1

About

Username
Juda1
Joined
Visits
589
Last Active
Roles
Website User

Comments

  • @Triem23: I saw that tut before and it helped me to understand why that couldn't be done by simply adding a clean plate to the ground without the projector: because then the clean plate has to be made of a top view 90° of the road and there is now t…
  • @Triem23 @Palacono: Just to let you know I THINK (only tried it with Palaconos clip as source) I found a possible solution: First of all: I wanted to clone the lower front with the door. and expand that building. I took the cam solve as source. I …
  • @Palacono: Ah, so the projector is a solution. I have to try it when I am back home this evening since I do not have the footage here. It just came to my eyes that an extension of that castle would be exact the same challenge they did. Can you provi…
  • @Palacono: Both videos are a good demonstration. But in the second you can see a bit of the parallax problem I am talking about: The upper is very thick as you can see at the top of it. At 0:05 short bevor the wall is coming back you can see that t…
  • Okay. Let's think this through step by step and please point out where or when I am missing something:: I did that you suggested and triem demonstrated in that video yesterday: I took the corner pin with "show corner region only" which looks like t…
  • Add: I am still afraid I did not tell the source of the problem right, now I found an example of what to do: A crowd replication of only one scene with a moving camera is sort of the same problem to solve. A simple cloning will not work because of …
  • @Palacono: I don't want to bother or stretch your nerves too far But the way you described it as well as what Triem23 did is isolating one image. That's what you wrote. So that is what I call a set extension with a still image. Projected what has …
  • Adding an option "unstretch" to quad warp: Stretching the warped image to full screen with that option. Can be very usefull for scene duplication as set extension when that unstretched video sequence is later put as 3D plane into 3D space.
  • @Palacono: But that way it is a still insertion! I am talking about a video insertion... EDIT: With a video insertion the corner pin is different in every frame so you do have to it for every frame since the source quad warp is different and so the…
  • Add: I think it could be done even more easier than in AE if the quad warp had an option "unstretch" which stretches the warped image to full screen. That's what they did in AE using the power pin connected to the bcc corner pin using "show corner r…
  • @Triem23: Thanks again so much, Mike. But keep in mind: This way it works for a single image. But what I try to reproduce is the way they did it with a "copy" of the video. It was not a still extension which I totally agree would be done the way you…
  • @Palacono: Exporting the image and cropping it brings it to the point: It's not about a still insertion, it's about a part of the scene duplicated and fit in with regard of parallax changes. With a still image it's like you said: Stretch it with an…
  • @Triem23: Thanks Mike. I tried it with a second quad warp strecthcing that image opposite to fit full screen. But that is a lot of manual work especially when there are a lot of frames. For that scene with three planes and so three corner pins there…
  • Ever looked here on youtube?
  • It's easy: The grade layer separates the 3D layers. When a grade layer is rendered, everything below is rendered. So layer 3 is now rendered due to the grade layer and appears as 2D layer which is behind layer 1. Every 2D layer is separating layers…
  • @MarioKluser Got it. With the plugin I use the render to control the result if any doubt about the tracking or so. From what I understand you want to do a remove. So when you are finished with tracking and took a look at the render in mocha all you …
  • I suggest contacting support instead of posting that question at the forum. 
  • @MarioKluser: Do I understand you correctly: You got a got track and a remove and you don't know how to get that into Hitfilm? If so: In Hitfilm you can set the "render source" at the effect (Mocha Pro) to the Remove Module. To speed things up I su…
  • http://hitfilm.com/video-tutorials#/  
  • Use a grade layer , set it up in one layer and copy it to those layers needed.
  • You can do it with mocha hitfilm, you do not need pro for just doing roto. There are tutorials about that with Axel on the tutorial page.
  • Hebrew is working if the chosen font supports Hebrew characters. So I think Arabic is supported as well (under Windows)
  • @CedricBonnier: Great. Thanks a lot to you and your fellows!
  • Any OFX Plugins? I got his a year ago when installing Vegas and Hitfilm 2017 with Boris bundle. Do you have an OFX installed?
  • 0 KB can't be fixed, it is just empty. There is no information to fix. When you start hitfilm again - doesn't it ask to recover the last project?
  • As far as I know you cannot project 2D on a 3D structure since it is on the wish list. So maybe you have to first render your camera drive and then fit that projections into that in a second step. Anyway I would like to give it a try, so save it as…
  • Can you provide a link to that object? I'd like to try something out.
  • @LiamMcM1: Take a look at the mocha tutorials on their page. You have to do roto. And most important: Mocha is looking for shapes, keep that in mind when tracking. It does not look for "objects" Example: If you draw a spline around a persons back w…
  • Wow, first of all: Long list, so lot of work, so thanks to all of you for doing this. Personally I do heavy rely on two things on the bug list: Correct tracker since I use it often and update of multiple view. I own 6.1 since 2 month now but didn't …
  • @Triem23: You said The Insert Module in Mocha can be useful for attaching graphic elements to tracked planes, but this isn't as powerful as what can be done in Hitfilm, but, for a still graphic element can be a lot faster.  I used matchmove with Ve…